Configuration register 0 for channel 0
TIMER_SEL | This field is used to select one of timers for channel %s. 0: select timer0 1: select timer1 2: select timer2 3: select timer3 |
SIG_OUT_EN | Set this bit to enable signal output on channel %s. |
IDLE_LV | This bit is used to control the output value when channel %s is inactive (when LEDC_SIG_OUT_EN_CH%s is 0). |
PARA_UP | This bit is used to update LEDC_HPOINT_CH%s, LEDC_DUTY_START_CH%s, LEDC_SIG_OUT_EN_CH%s, LEDC_TIMER_SEL_CH%s, LEDC_DUTY_NUM_CH%s, LEDC_DUTY_CYCLE_CH%s, LEDC_DUTY_SCALE_CH%s, LEDC_DUTY_INC_CH%s, and LEDC_OVF_CNT_EN_CH%s fields for channel %s, and will be automatically cleared by hardware. |
OVF_NUM | This register is used to configure the maximum times of overflow minus 1. The LEDC_OVF_CNT_CH%s_INT interrupt will be triggered when channel %s overflows for (LEDC_OVF_NUM_CH%s + 1) times. |
OVF_CNT_EN | This bit is used to enable the ovf_cnt of channel %s. |
OVF_CNT_RESET | Set this bit to reset the ovf_cnt of channel %s. |
OVF_CNT_RESET_ST | This is the status bit of LEDC_OVF_CNT_RESET_CH%s. |